Charger Plus Dash Cam Hardwiring Kit

The Charger Plus Hardwire Kit is designed to work with the parking mode feature found on your dash cam. By supplying a constant supply of power, your dash cam will be able to remain on even when your vehicle is turned off and parked.

We’ve made the Charger Plus Hardwire Kit universally compatible with any dash cam on the market. This is achieved by the use of a cigarette socket. Simply plug in a USB cigarette charger (sold separately) in to the cigarette socket and plug in your dash cam’s USB power cable in to power on.

The built-in timer is a unique feature of the Charger Plus Hardwire Kit. The built-in timer is programmable for run-times of 2, 4, 6, 12, 24 hours or always on. Fully automate the run-time of your dash cam and only capture how long of a duration you want.

Equipped with voltage protection settings, the Charger Plus Hardwire Kit cuts off power when your vehicle’s battery drops below the set threshold. Thus protecting your vehicle from battery drainage. Voltage protection setting ranges from 11.6/23.6V to 12.5/24.5V.

The Charger Plus Hardwire Kit is designed to safely provide 24/7 uninterrupted power even when your vehicle is turned off and parked. This is achieved through the direct connection of the hardwire kit to your fuse box.

Lost? Don’t worry, we’re here to guide you every step of the way. Read our Dash Cam Hardwire Kit Installation Guide for step-by-step instructions.

Some required tools are not included with the hardwire kit. Prior to the starts of the installation process, please make sure you have the necessary tools for a safe installation.

• Multimeter

• Crimp Tool

• x2 Car fuse (Type of fuse will depend on the fuse you will use

• x2 Add-a-fuse (Type of add-a-fuse will depend on the fuse you will use)